ES Components is the First Semiconductor Die Distributor to Receive AS6081 Certification
ES Components is now officially certified to the AS6081 standard in support of its customers’ AS5553 requirements. On November 2, 2015 NQA (An ANAB Accredited Company), presented ES Components with a Certificate of Registration.
ES Components is now officially certified to the MIL-PRF-38535 standard and 883 Lab Suitablity in support of its customers’ MIL-PRF-38535 requirements. On August 23, 2019 DLA Land and Marine Agency, presented ES Components with a Full Certification Class Q for MIL-PRF-38535; FSC 5962; VQC-19-034145; Grammens; CN: 068312 Certificate of Registration.
RATIONALE OF THE AS6081 STANDARD:
This standard was created in response to a significant and increasing volume of fraudulent/counterfeit electronic parts entering the aerospace supply chain, posing significant performance, reliability, and safety risks. This standard was created to provide uniform requirements, practices and methods to mitigate the risks of purchasing and supplying fraudulent/counterfeit electronic parts.
“We are proud to be the first die distributor to adopt this new standard. When a customer comes to us they can
rest assured that ES Components has processes and procedures in place to mitigate their risk of receiving
fraudulent/counterfeit devices. This is one more reason for customers to buy from us.” said Mehrdad Namin,
Vice President and General Manager, of ES Components.
BARE DIE, WAFER, AND PACKAGED DEVICES
ES Components is ISO 9001: 2008 and AS9120 certified. ES Components regards quality as conformance to our customers' specifications. It is our goal to meet or exceed our customers' requirements. In our efforts to achieve quality, we are committed to comply with requirements and continual improvement of the effectiveness of the quality management system.
OUR ISO CERTIFICATION
We obtained our ISO Certification through National Quality Assurance on January 30,2002. We take our Quality Management System very seriously and we continually strive to improve upon its effectiveness. Quality can be defined as "the degree to which a set of inherent characteristics fulfills requirements." Quality may also be referred to as "the degree of excellence of a thing." Quality is not a concept at ES Components. It is the driving force behind everything that we do. We are committed to providing you with the highest quality products and services to fulfill your requirements. Our relentless pursuit of excellence is second to none.
OUR CLASS 10,000 CLEAN ROOM
ES Components has on-site, a certified class 10,000 clean room facility for the inspection & handling of all our bare die, wafer products. All inspection is performed under a Class 100 hood. ES Components maintains full ESD protection throughout the die inspection process. Inspectors are continuously monitored through the use of DESCO Continuous Ground Monitors. ES Components utilizes high power Nikon and Leica metallurgical microscopes for all bare die inspection. Our clean room inspectors have over 75 years of combined experience in quality inspection; they are the backbone of our production team.
AVOIDING COUNTERFEIT MICROELECTRONICS
Industry wide issues with Counterfeit Microelectronics - Read about our commitment to safeguard against it here.
CONFLICT MINERALS (METALS) POLICY
The United States has enacted legislation, the Dodd-Frank Act (Section 1502), that will require public companies to disclose whether their products contain certain conflict metals (Tin, Gold, Tantalum, and Tungsten). This law, beginning in 2014, affects many of our publicly traded, Franchised suppliers.
ES Components will continue to support our customer's and supplier's efforts in complying with their reporting requirements.
Quality Management System Quality Control
New! ESC - Hermetic Commercial / Military Screening Comparison Guide