ES Components | A Franchised Distributor and Manufacturer
Banner10-4-19AllOtherPages.png

sitime up-screen process flow

Discrete Component Specialist
Manufacturer and Franchised Distributor
ES Components

 
SiTimeGray.JPG

Up-Screen Process Flow

ES Components can 100% up-screen or sample test SiTime’s products in accordance with MIL-PRF-55310 requirements and MIL-STD-883 methods.

These screenings can be selected per our Standard flows, individual selection or per Customer Drawing.

ES Components - SiTime 100% Up-Screen Standard Flows (Based on Mil-PRF-55310E TABLE III):

Test inspection Accordance with level S Accordance with level B
method-condition method-condition
     
Thermal shock MIL-STD-883, method 1011,
condition A
N/A
     
Temperature cycling MIL-STD-883, method 1010,
condition B
MIL-STD-883, method 1010,
condition B
     
Constant acceleration MIL-STD-883, method 2001,
condition A, Y1 only (5000 g's)
MIL-STD-883, method 2001,
condition A, Y1 only (5000 g's)
     
Seal (fine and gross leak)
Hermetic Devices only
see 4.8.2.2.2 see 4.8.2.2.2
     
Particle impact noise detection
(PIND)
MIL-STD-883, method 2020,
condition B
N/A
     
Electrical test: Nominal supply voltage,
specified load, +23⁰C
Nominal supply voltage,
specified load, +23⁰C
Input current-power 4.8.5 N/A
Output waveform 4.8.20 N/A
Output voltage-power 4.8.21 N/A
As specified 3.1 (Datasheet) 3.1 (datasheet)
     
Burn-in (load) +125⁰C, nominal supply voltage and burn-in load, 240 hours minimum +125⁰C, nominal supply voltage and burn-in load, 160 hours minimum
     
Electrical test: Nominal and extreme supply voltages, specified load, +23⁰C and temperature extremes, record all test parameters by serial number. Nominal supply voltage, specified load, +23⁰C and verify frequency at the temperature extremes.
Input current-power 4.8.5 4.8.5
Output waveform 4.8.20 4.8.20
Output voltage-power 4.8.21 4.8.21
As specified 3.1 (datasheet) 3.1 (datasheet)
     
Radiographic MIL-STD-883, method 2012 N/A