Design Engineers! 8 Benefits Of Die Stacking.



In microelectronics, a “three dimensional integrated circuit” (3D IC) is an integrated circuit manufactured by stacking silicon wafers and/or dies and interconnecting them vertically using through-silicon vias (TSVs) so that they behave as a single device to achieve performance improvements at reduced power and smaller footprint than conventional two dimensional processes.





More functionality fits into a small space. This extends Moore’s law and enables a new generation of tiny but powerful devices.




Partitioning a large chip into multiple smaller dies with 3D stacking can improve the yield and reduce the fabrication cost if individual dies are tested separately.



Heterogeneous Integration

Circuit layers can be built with different processes, or even on different types of wafers. This means that components can be optimized to a much greater degree than if they were built together on a single wafer. Moreover, components with incompatible manufacturing could be combined in a single 3D IC.



Shorter Interconnect

The average wire length is reduced. Common figures reported by researchers are on the order of 10–15%, but this reduction mostly applies to longer interconnect, which may affect circuit delay by a greater amount. Given that 3D wires have much higher capacitance than conventional in-die wires, circuit delay may or may not improve.




Keeping a signal on-chip can reduce its power consumption by 10–100 times.[11] Shorter wires also reduce power consumption by producing less parasitic capacitance.  Reducing the power budget leads to less heat generation, extended battery life, and lower cost of operation.




The vertical dimension adds a higher order of connectivity and offers new design possibilities.



Circuit Security

The stacked structure complicates attempts to reverse engineer the circuitry. Sensitive circuits may also be divided among the layers in such a way as to obscure the function of each layer.




3D integration allows large numbers of vertical vias between the layers. This allows construction of wide bandwidth buses between functional blocks in different layers. A typical example would be a processor+memory 3D stack, with the cache memory stacked on top of the processor. This arrangement allows a bus much wider than the typical 128 or 256 bits between the cache and processor. Wide buses in turn alleviate the memory wall problem.

Reference: Wikipedia

More functionality fits into a small space. This extends Moore’s law and enables a new generation of tiny but powerful devices.