A supercapacitor is a double-layer capacitor that has very high capacitance but low voltage limits. Supercapacitors store more energy than electrolytic capacitors and they are rated in farads (F). Supercapacitors store electrical energy at an electrode–electrolyte interface. They consist of two metal plates, which only are coated with a porous material known as activated carbon. As a result, they have a bigger area for storing much more charge.
Supercapacitors have many advantages. For instance, they maintain a long cycle lifetime—they can be cycled hundreds of thousands times with minimal change in performance. A supercapacitor’s lifetime spans 10 to 20 years, and the capacity might reduce from 100% to 80% after 10 or so years. Thanks to their low equivalent series resistance (ESR), supercapacitors provide high power density and high load currents to achieve almost instant charge in seconds. Temperature performance is also strong, delivering energy in temperatures as low as –40°C.
On the other hand, supercapacitors are offset by their low energy density. Thus, they can’t be used as a continuous power source. One cell has a typical voltage of 2.7 V; if higher voltage is needed, the cells must be connected in series.
Supercapacitors are used in many power-management applications requiring many rapid charge/discharge cycles for short-term power needs. Some of these applications include:
• Voltage stabilization in start/stop systems
• Electronic door locks in the event of power failures
• Regenerative braking systems
• Distribution microgrid
• Medical devices
• Energy harvesting
• Consumer electronics
• Kitchen appliances
• Real-time clock backup
• Utility meters
• Backup power
• Grid stability
• Wind energy
• Energy efficiency and frequency regulation
• Remote power for sensors, LEDs, switches
• Memory-backup SRAM
• Burst-mode power delivery
• Forklift hybridization
Learn more about Ultracapacitors